A CE-marked glove label can point to two different standards — EN 388 for general mechanical risks (abrasion, cut, tear, puncture) or EN 13594 for motorcycle-specific impact protection — and an "X" in any EN 388 position means that particular test was not performed or does not apply to that glove, not that the glove failed it.
What "CE" actually certifies
A CE mark shows a product has gone through a conformity-assessment route under EU PPE rules; it does not, by itself, state a performance number. PPE Category II (the category referenced on both MVPTOO gloves with a certification line) requires a notified body's EU type-examination. The CE mark tells you a route was followed — the standard name and level printed next to it is where the actual test results live.
The six positions in an EN 388 marking, one at a time
An EN 388:2016+A1:2018 marking can carry up to six characters after the pictogram, each answering a separate question:
- Position 1 — Abrasion: a class from 0 to 4.
- Position 2 — Blade cut (Coup test): a class from 0 to 5, or X if this method wasn't used for this glove.
- Position 3 — Tear: a class from 0 to 4.
- Position 4 — Puncture: a class from 0 to 4, or X if not tested.
- Position 5 — ISO 13997 cut (TDM test): an optional letter from A to F, or X if not tested.
- Position 6 — Impact protection (back of hand): an optional letter, P for a pass result or F for a fail result, present only when this test was performed.
Reading a marking means reading each position separately — a single overall "safety rating" is not how the standard is structured.
What "X" means in an EN 388 marking
X in any of the first five positions means that specific test was not performed for this product, or the test method does not apply to it. It is a documentation gap, not a failing grade — the standard has no requirement that every glove be tested against every possible risk. When a listing's marking shows X in the cut or puncture position, the correct reading is "this glove has not been tested against that specific risk," not "this glove failed that test," and not any claim about how it would perform if tested.
What "KP" means, and where it comes from
KP stands for knuckle protection, and it's a term used under EN 13594, the motorcycle-glove impact standard — not under EN 388. On the MVPTOO Leather Riding Glove's page, the certification line references EN 13594:2015, Level 1, "with knuckle protection," which is where KP-style wording would apply for that family. EN 388 and KP/EN 13594 are two separate documents answering two separate questions: EN 388 covers general mechanical risks, EN 13594 covers motorcycle-specific impact protection at the knuckles and other zones.
Two MVPTOO gloves, two different standards, read verbatim
The table below quotes the certification text exactly as it appears on each product page, as listed on mvptoo.com, checked 2026-09-20. No level, class, or letter below is inferred — each is copied from the live listing.
| Product | Price | Certification text as listed |
|---|---|---|
| Leather Riding Glove | $39.99 | "Protective gloves for motorcycle riders. EU PPE Category II; EN ISO 21420:2020; EN 13594:2015, Level 1 with knuckle protection; YM-04 Black, sizes M–XXL." The page also states coverage under EU Type Examination Certificate DK-PPE002192 i01. |
| Tactical Utility Glove (Black and Green) | $30.99 | "CE Category II protective gloves against mechanical risks - EN 388:2016+A1:2018 (performance level 1X1XXP) and EN ISO 21420:2020+A1:2024. Model B36, sizes S-XL. This is mechanical-risk certification, not motorcycle-impact certification (EN 13594)." |
| Fingerless Tactical Glove | $24.99 | "This glove is not certified protective equipment." |
| All other current glove SKUs (Moto Grip, Hard-Knuckle Riding, Full-Finger Riding, Summer Mesh, Cold Weather Touchscreen) | $27.99–$34.99 | No certification statement listed on the page. |
Reading the Tactical Utility Glove's own marking, "1X1XXP," position by position against the six-position list above: position 1 (abrasion) is 1, position 2 (cut, Coup test) is X, position 3 (tear) is 1, position 4 (puncture) is X, position 5 (ISO 13997 cut) is X, and position 6 (impact) is P. Positions 2 and 4 — cut and puncture — are both X on this marking, meaning those two specific tests are not stated for this product. The page itself notes this is mechanical-risk certification, separate from motorcycle-impact certification.
Certification level and price: comparisons worth reading
MVPTOO keeps a small set of articles that compare certification wording across brands and price points, without claiming equal performance between listings. Worth reading if you're weighing a certified glove's price against its documented level:
- Comparing a $329.95 EN 13594:2015 Level 1 KP listing with a plain certification sentence
- What a $399.90 glove page can tell you, and what it cannot
- Why a $70.80 tactical glove costs more: the marking is different
- The $124.95 label question: what that page actually states
Keep reading: reading certification documents and labels
- What an X means on a glove marking
- What "Category II" means when you read glove documents
- Reading an EU type-examination reference alongside the product page
- What a 5 J knuckle-impact test reference is designed to check
- Why EN 13594 and EN 388 labels answer different questions
- Level 1 and Level 2: reading the label before drawing a conclusion
- How to read a motorcycle glove label before you ride
- Questions to ask before buying a certified glove
- Whether EN 388 markings help an off-road rider decide
- Certified and uncertified gloves: what else can you compare
See both certified families in the leather riding gloves collection and the tactical utility gloves collection.
FAQ: Reading EN 388 and EN 13594 Markings
What does the X in the Tactical Utility Glove's second and fourth positions mean?
Positions 2 and 4 in EN 388 are the blade-cut (Coup test) and puncture test positions. An X in either means that specific test is not stated for this product — it is not a claim about how the glove would perform if tested, and it is not a failing score.
Is EN 388 the same thing as EN 13594?
No. EN 388 covers general mechanical risks (abrasion, cut, tear, puncture, and optional impact). EN 13594 is the standard written specifically for motorcycle gloves, covering impact protection including the knuckles. The Tactical Utility Glove's own page states its EN 388 certification "is mechanical-risk certification, not motorcycle-impact certification (EN 13594)."
What does KP stand for?
Knuckle protection, referenced under EN 13594. It's the term used for the motorcycle-specific standard, not for EN 388.
Does a CE mark by itself tell me a glove's protection level?
No. The CE mark shows a conformity-assessment route was followed (for PPE Category II, that includes a notified body's EU type-examination). The actual level or class is stated separately, in the standard name and the marking's positions.
Why does the Fingerless Tactical Glove say "not certified protective equipment"?
That's the statement printed on its own product page. Not every MVPTOO glove carries a certification; the page states plainly when one does not apply.
Where can I see the actual certificate number for a specific model?
Open the individual product page and look for the certification text in the description or specification area — for the Leather Riding Glove, that's where the EU Type Examination Certificate number (DK-PPE002192 i01) is stated.
How this guide was made
This guide was drafted by the MVPTOO editorial team with AI assistance. The certification text quoted above for the Leather Riding Glove, Tactical Utility Glove, and Fingerless Tactical Glove comes directly from each product page and was checked on September 20, 2026. The general explanation of how an EN 388 marking's six positions and the CE process work is publicly documented standard information, not a claim about how any specific MVPTOO product performs beyond what its own certificate states; we have not conducted or witnessed any of these tests ourselves. Maya Keller is a pen name used by the MVPTOO editorial team for our motorcycle glove fit and protection guides; she does not represent a real rider, lab, or certification body.
